SpeedyBee F405 V5 OX32 55A 4in1 Stack - Deluxe Edition

Product Description

The SpeedyBee F405 V5 OX32 55A 4in1 Stack with 55A OX32 ESC is SpeedyBee's latest stack. It features a 55A 4in1 OX32 ESC and an F405 flight controller that supports the SpeedyBee phone app to configure your quad on the go.

SpeedyBee F405 V5 FC Specifications:

• Product Name : SpeedyBee F405 V5 30.5×30.5mm Model Aircraft Flight Controller
• MCU : STM32F405
• IMU (Gyro) : ICM42688P
• USB Port Type : Type-C interface
• Barometer : SPA06-003
• OSD Chip : AT7456E
• Full-featured Bluetooth Tuning : Supported. Connect via SpeedyBee App for FC firmware flashing and parameter tuning.
• Wireless FC Firmware Upgrade : Supported
• DJI Air Unit Connection : Supports 6-pin direct plug-in or solder connection
• Blackbox : Supported, built-in 16MB storage chip
• Input Voltage : 3-6S LiPo battery
• Independent 5V BEC Output : 9 groups, total output current 1.5A
• Independent 9V BEC Output : 2 groups, total output current 3A, supports PINIO remote on/off control
• MCU & Gyro Power : Independent LDO
• 3.3V Output : 1 group (1× 3.3V pad on front)
• 4.5V Output : 3 groups (3× 4.5V pads on front), max output current 1A
• ESC Signal : M1-M4 pads and 10-pin connector on the back
• Servo Signal : S5-S6 pads on the front
• ESC Telemetry Input : Supported (UART5)
• Betaflight Camera Tuning Pad : Supported (CC pad on front)
• I2C : Supported (GPS connector + pads)
• UART : UART1 (Bluetooth); UART2 (front pads for receiver); UART3 (DJI VTX pads + rear SH1.0-6-pin); UART4 (GPS pads + front SH1.0-6-pin); UART5 (TLM); UART6 (receiver pads + rear SH1.0-4-pin)
• ST LED Pads : Supported, controlled by FC firmware
• Meteor LED Strip Pads : Supported, SB-LED/ST-LED mode switchable via BOOT button or App
• Buzzer Pads : Supported
• BOOT Button : Hold for DFU, short-press cycles LED, long-press switches SB-LED/ST-LED
• RSSI Pads : Supported
• SmartPort : Not supported
• Supported FC Firmware : Betaflight, INAV, Ardupilot
• Firmware Target Name : SPEEDYBEEF405V5
• Factory Firmware Version : Betaflight 4.5.2
• Configurator Version : Betaflight 10.10.0
• Mounting Holes : 30.5 × 30.5mm (Ø4mm), side opening
• Dimensions : 39mm × 39mm × 4.9mm
• Weight : 8.1g

SpeedyBee OX32 55A ESC Specifications:

• Product Name : SpeedyBee OX32 55A 30.5×30.5 4-in-1 ESC
• Default Firmware : OX32
• Continuous Current : 55A (per channel) / 220A (4-in-1)
• Maximum Current : 70A (per channel) / 280A (4-in-1)
• TVS Protective Diode : Yes (built-in)
• External Capacitor : 1000µF Solid Capacitor (included in package)
• ESC/Motor Protocol : DSHOT300/600
• Input Voltage : 3-6S LiPo
• Power Output : VBAT
• Current Sensor : Supported
• ESC Telemetry : Supported
• Mounting Holes : 30.5 × 30.5mm (Ø4mm), side opening
• Dimensions : 40.9mm (L) × 44.9mm (W) × 8.0mm (H) (incl. heatsink)
• Weight : 19.1g
• ESC Webpage : https://ox32.oxbot.com/
• Current Meter Note : Supported (Scale=27, Offset=-2644)

Includes:

• 1x SpeedyBee F405 V5 OX32 55A 4in1 Stack
• 1x Short Circuit Protection Tool
• 1x Active Buzzer
• Accessories